BTTQV - RAPID FIXER WITH HARDENER, WORKING SOLUTION
- MSDS: BTTQV
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: RAPID FIXER WITH HARDENER, WORKING SOLUTION
- National Stock Number: 6750-00D003306
Product Identification
Product ID:RAPID FIXER WITH HARDENER, WORKING SOLUTION
MSDS Date:03/25/1987
FSC:6750
NIIN:00D003306
MSDS Number: BTTQV
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
ALUMINUM SULFATE (SARA III)
CAS: 10043-01-3
RTECS: BD1700000
Fraction By Weight: 1-5% %
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 85-90% %
AMMONIUM THIOSULFATE
CAS: 7783-18-8
RTECS: XN6465000
Fraction By Weight: 10-15% %
ACETIC ACID (SARA III)
CAS: 64-19-7
RTECS: AF1225000
Fraction By Weight: 1-5% %
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM/15 STEL; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SODIUM METABISULFITE
CAS: 7681-57-4
RTECS: UX8225000
Fraction By Weight: 1-5% %
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9394
SODIUM TETRABORATE, DECAHYDRATE
CAS: 1303-96-4
RTECS: VZ2275000
Fraction By Weight: 1-5% %
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3; 9394
Hazards
LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPECTED TO BE A LOW INHALATION HAZARD
FOR RECOMMENDED HANDLING. MAY CAUSE TRANSIENT EYE IRRITATION.
EXPECTED TO BE A LOW INGESTION HAZARD.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYE IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: WASH OUT IMMEDIATELY WITH WATER. GET MEDICAL ATTENTION
IF SYMPTOMS OCCUR.
Fire Fighting
Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER IF
ALLOWABLE. OTHERWISE, ABSORB SPILL WITH VERMICULITE OR OTHER INERT
MATERIAL, THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. CLEAN
SURFACE THOROUGHLY TO REM OVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM CONTACT WITH OXIDIZING
MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES PER
HOUR) SHOULD BE USED. RATES SHOULD MATCH CONDITIONS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:WASHING FACILITIES, AN EMERGENCY EYE WASH
STATION AND SHOWER SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
PRODUCT IS EXPECTED TO HAVE A LOW BIOCHEMICAL OXYGEN DEMAND AND LITTLE
POTENTIAL TO CAUSE OXYGEN DEPLETION IN AQUEOUS SYSTEMS, A LOW
POTENTIAL TO AFFECT SOME AQUATIC ORGANISMS, A LOW POTENTIAL TO AFFE
CT SECONDARY WASTE TREATMENT MICROBIAL METABOLISM. DILUTED IT IS
NOT EXPECTED TO HAVE A SIGNIFICANT IMPACT.
Chemical Properties
HCC:C3
Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.10
pH:4.37
Evaporation Rate & Reference:0.4 (N-BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR SOLUTION
Percent Volatiles by Volume:90%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AMMONIUM GAS
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.